Skip to content
Gulf South Engineering and Testing, Inc.
Menu

Guides

How to Choose a Geotechnical Engineer for a Gulf Coast Site

· Gulf South Engineering and Testing

By Gulf South Engineering and Testing

The geotechnical engineer is the first consultant to see what is under your site and the last to sign off on how the ground will carry what you build. On Gulf Coast work, with soft soils, water and coastal structures, that choice shapes the whole project. Here is what to check.

1. Confirm the license in your state

Engineering recommendations must come from a licensed professional engineer, and the firm should be licensed where the project is. Both state boards publish search tools:

  • Louisiana: the Louisiana Professional Engineering and Land Surveying Board's Individual Search (lapels.com/indivsearch) and Firm Search (lapels.com/firmsearch)
  • Mississippi: the Mississippi Board of Licensure for Professional Engineers and Surveyors, Verification of Licensure (pepls.ms.gov)

Gulf South Engineering and Testing is licensed in Louisiana, Mississippi, Texas, Arkansas and Alabama.

2. Match experience to your structure

Ask which of their past projects look like yours. On Gulf South's ENGINEERING page, project types include shallow and deep foundations, cofferdams and retaining walls, slope stability and settlement analyses, shoreline and coastal protection, wetland restoration, canals and pump station foundations, pavements and roadways, bridges, and Mississippi River facility permitting.

3. Ask how they will investigate the site

A good proposal explains the borings: how many, how deep, and which samples. Field methods are standardized; for example, SPT sampling follows ASTM D1586/D1586M, which "provides samples for identification purposes and provides a measure of penetration resistance which can be used for geotechnical design purposes" (ASTM D1586/D1586M, section 4.1), and thin-walled tube sampling follows ASTM D1587/D1587M for "intact soil samples suitable for laboratory tests of engineering properties" (ASTM D1587/D1587M, section 1.1).

Gulf South performs shallow and deep soil borings up to 300 feet deep, undisturbed and SPT sampling, monitor well and piezometer installation, pavement coring and water sampling.

4. Ask where the samples are tested

Laboratory results drive the recommendations. Ask whether the firm runs its own laboratory, which accreditations it holds, and which test methods it uses. Gulf South operates two labs with certified technicians; its laboratory is AASHTO accredited and USACE validated, and all laboratory testing is performed in accordance with ASTM and/or other approved procedures.

5. Ask who stays with the project into construction

Recommendations get tested in the field during construction: compaction, piles, concrete. Ask whether the same firm can provide construction materials testing and inspection, and how its engineers stay involved.

Questions to ask before you sign

  1. Which licensed engineer will sign the report, and in which states is the firm licensed?
  2. Which past projects are most like ours?
  3. How many borings, how deep, and what sampling do you plan, and why?
  4. Where will the samples be tested, and under which accreditations?
  5. What will the report include, and when?
  6. Can you support the project during construction?

Frequently asked questions

How do I check a Louisiana engineer's license?

Use the Individual Search and Firm Search on the Louisiana Professional Engineering and Land Surveying Board website, lapels.com.

How do I check a Mississippi engineer's license?

Use Verification of Licensure on the Mississippi Board of Licensure for Professional Engineers and Surveyors website, pepls.ms.gov.

How deep should borings go?

That depends on the structure and the soils; your geotechnical engineer sets the depths. Gulf South performs borings up to 300 feet deep.

Does the same firm handle testing during construction?

Some do. Gulf South provides both geotechnical engineering and construction materials testing and inspection.

Sources

All guides|Contact Gulf South