# 7 Questions to Ask Before You Hire a Testing and Inspection Firm in Mississippi – Gulf South Engineering and Testing, Inc.

[Guides](/guides/)

# 7 Questions to Ask Before You Hire a Testing and Inspection Firm in Mississippi

October 23, 2026 · Gulf South Engineering and Testing

_By Gulf South Engineering and Testing_

A testing and inspection firm checks that what is built matches what was designed. Before you sign one for a Mississippi project, these seven questions tell you most of what you need to know.

## 1\. Which of our tests are on your accreditation scope?

Accreditation is test by test. The AASHTO Accreditation Program "formally recognizes the competency of thousands of testing laboratories to perform specific tests on construction materials" ([AASHTO re:source, AASHTO Accreditation Overview](https://aashtoresource.org/aap/overview)). Ask for the scope and match it to your specifications. Gulf South's laboratory is AASHTO accredited.

## 2\. Are your engineers licensed in Mississippi?

When results need engineering judgment, the engineer should hold a Mississippi license. Check it on the Mississippi Board of Licensure for Professional Engineers and Surveyors' Verification of Licensure page ([pepls.ms.gov](https://www.pepls.ms.gov/verification-licensure-or-examinations)). Gulf South is licensed in Mississippi, Louisiana, Texas, Arkansas and Alabama.

## 3\. Which test methods will you use?

Your specifications name them; the firm should run them as written. For example, field density of soil by nuclear gauge is covered by ASTM D6938, which "describes the procedures for measuring in-place density and moisture of soil and soil-aggregate by use of nuclear equipment" ([ASTM D6938](https://store.astm.org/d6938-17ae01.html), section 1.1), and concrete cylinder strength by ASTM C39/C39M, whose results "are used as a basis for quality control of concrete proportioning, mixing, and placing operations; determination of compliance with specifications" ([ASTM C39/C39M](https://store.astm.org/c0039_c0039m-21.html), section 5.3).

## 4\. Where is your nearest office?

Field testing depends on technicians reaching the site when the work happens. Gulf South has a Mississippi office in Jackson, plus offices in Kenner, Gonzales and Shreveport, Louisiana.

## 5\. What do you test and inspect?

Make sure the firm covers your whole scope. Gulf South's CMT services include fill and base compaction and density testing, concrete testing and inspection, asphalt testing, steel inspection, earthwork and proof-roll inspection, pile and shaft installation monitoring and load tests, and vibration and noise monitoring.

## 6\. How will we receive results, and how are failures flagged?

Ask for a sample report, how often you receive results, and who calls you when a test fails.

## 7\. Who are your technicians, and what certifications do they hold?

Ask who will be on your site and what they are certified for. Gulf South's laboratory work is done by certified technicians.

## Frequently asked questions

### How do I verify an engineer's Mississippi license?

Use Verification of Licensure on the Mississippi Board of Licensure for Professional Engineers and Surveyors website, pepls.ms.gov.

### What is AASHTO accreditation?

AASHTO re:source's program that recognizes a laboratory's competency to perform specific tests on construction materials; check the lab's scope against your specifications.

### Which standard covers nuclear density testing?

ASTM D6938 covers in-place density and moisture of soil and soil-aggregate by nuclear methods.

### Does Gulf South work in Mississippi?

Yes. Gulf South has an office in Jackson, Mississippi, and is licensed in Mississippi.

## Sources

*   AASHTO re:source, AASHTO Accreditation Overview: [https://aashtoresource.org/aap/overview](https://aashtoresource.org/aap/overview) (opened 2026-10-22)
*   Mississippi Board of Licensure for Professional Engineers and Surveyors, Verification of Licensure or Examinations: [https://www.pepls.ms.gov/verification-licensure-or-examinations](https://www.pepls.ms.gov/verification-licensure-or-examinations) (opened 2026-10-22)
*   ASTM D6938-17ae1, In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods, section 1.1: [https://store.astm.org/d6938-17ae01.html](https://store.astm.org/d6938-17ae01.html) (opened 2026-10-22)
*   ASTM C39/C39M-21, section 5.3: [https://store.astm.org/c0039\_c0039m-21.html](https://store.astm.org/c0039_c0039m-21.html) (opened 2026-10-22)
*   Gulf South Engineering and Testing, CONSTRUCTION MATERIALS TESTING, LABORATORY CAPABILITIES and ABOUT US pages (stage 1 mirror, 2026-10-21): [https://gulfsoutheng.com/construction-materials-testing/](/construction-materials-testing/), [https://gulfsoutheng.com/laboratory-capabilities/](/laboratory-capabilities/), [https://gulfsoutheng.com/](/)

[All guides](/guides/)|[Contact Gulf South](/contact/)
